Shenzhen GreFlow Energy Co., Limited
Add to Cart
10Kwh Solar Powered Battery Lifepo4 48v 200ah Charged By Solar Panels
Basic specification of 10Kwh Solar Powered Battery
| NO. | Item | General Parameter | Remark |
| 1 | Combination method | 15S4P | |
| 2 | Typical Capacity | 200Ah | Standard discharge after Standard charge |
| 3 | Factory Voltage | 49V-51.0V(40-60%) | Mean Operation Voltage |
| 4 | Voltage at end of Discharge | 40-44V | Discharge Cut-off Voltage |
| 5 | Charging Voltage | 53-55V | |
| 6 | Internal Impedance | ≤60mΩ | Internal resistance measured at AC 1KHZ after 50% charge The measure must uses the new batteries that within one week after shipment and cycles less than 5 times |
| 7 | Standard charge | Constant Current 40A Constant Voltage see No.5 0.02CA cut-off | Charge time : Approx 6 h Limiting current 20A |
| 8 | Standard discharge | Constant current:40A | end voltage see NO.4 |
| 9 | Maximum Continuous Charge Current | 100A | ≥10ºC |
| 10 | Maximum Continuous Discharge Current | 100A | ≥10ºC |
| 11 | Operation Temperature Range | Charge: 0~45℃ Discharge: -20~55℃ | 60±25%R.H. Bare Cell |
| 12 | Storage Temperature Range | Less than 12 months : -10~35℃ less than 3 months: -10~45℃ Less than 7 day : -20~65℃ | at the shipment state |
| 13 | Dimensions | 680*485*180 (220)mm Include Bracket | |
| 14 | Weight | 103KG |
The BMS function introduction of 10Kwh Solar Powered Battery
Case Stracture of 10Kwh Solar Powered Battery
The connection image of RS485 Parallel Communication
Address Switch function ( only in Parallel)
The Package of 10Kwh Solar Powered Battery
The Wooden package of 4 sets of Powerwall 48V 200Ah 9.6Kwh
The Wooden package of 6 sets of Powerwall 48V 200Ah 9.6Kwh
FAQ
Q1: Before order, can I have samples for testing?
A: Yes, we can provide you samples for testing firstly.
Q2: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q3: How to proceed an order?
A: 1. Contact our service & let us know your requirements or application.
2. We quote according to your requirements or our suggestions.
Q4: What kind of environment should lithium batteries store?
A: -40°C~50°C, 65±20%RH storage for a long time(>3 months)
and the storage condition shall be:<35°C , 65±20%RH
Q5: What is MOQ?
A: Low MOQ, 1pc for sample checking is available.